Proheat M80 Manuel de service télécharger pdf (Page 24)

Enclosure Lid (Optional)

• Torque screws (4) to 100 in. lbs. ± 10 in. lbs. (11.6 Nm ± 1.1 Nm).

Fuel Filter Fitting

• Install O-ring onto fitting.

• Torque fitting to 100 ± 10 in. lbs. (11.3 ± 1.1 Nm).

Rotary Vane Compressor ONLY

Serial Numbers 500000 – 699999

• Install O-rings into burner flange.

• Install compressor into burner flange. (Ensure correct alignment—refer to

Compressor Replacement’ on page 5-7.)

• Torque screws (2) to 75 in. lbs. ± 3 in. lbs. (8.5 Nm ± 0.3 Nm).

Relief Valve

– for Use with Rotary Vane Compressor ONLY

Serial Numbers 600000 – 699999

• Torque to 25 in. lbs. ± 3 in. lbs. (2.8 Nm ± 0.3 Nm).

Diaphragm Compressor ONLY

Serial Numbers 70000 and above

• Install O-rings in to cylinder head and valve cover (not shown).

• Ensure connecting rod is at BDC and ensure the diaphragm is concentric

to the diaphragm opening (not shown).

• Torque to 27 in. lbs +/- 3 in. lbs using a crisscross pattern.

1-11

PROHEAT M-SERIES G-II PCM SERVICE MANUAL

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 89 90

Pas de commentaire

Proheat M80 Manuel de service Page 24